Steel Parts Trading
We import, stock and supply fabricated, machined, cast, forged and galvanised steel parts and industrial hardware, bought through trusted partners in India and sold to Australian manufacturers and distributors.
Browse productsA2Z Global Group Pty Ltd is a Melbourne-based supplier of fabricated, machined, cast, forged and hot-dip galvanised steel parts. Our range covers shafts, pulleys, gears, coated hardware, hoses, valves, piping and flanges, sourced through trusted manufacturing partners in India. We also offer low-cost-country procurement consultancy for engineered goods, and we are building to serve clients in the United States, United Kingdom and European Union.
One accountable partner for trading and sourcing engineered goods.
We import, stock and supply fabricated, machined, cast, forged and galvanised steel parts and industrial hardware, bought through trusted partners in India and sold to Australian manufacturers and distributors.
Browse productsWe help clients develop and source parts from low-cost countries, covering supplier vetting, RFQ, quality control, logistics and end-to-end supply-chain management for engineered goods.
Our consultancyWe trade across the industrial supply chain
We import, stock and supply a broad range of steel and industrial parts, sourced through trusted manufacturers in India and delivered across Australia.
Structural and sheet-metal fabrication and welded assemblies made to your drawing.
CNC turned and milled parts produced to tight tolerances and material specs.
Power-transmission components including shafts, pulleys, sprockets and gears.
Iron, steel and alloy castings and forged parts, machined and certified.
Corrosion-protected galvanised steel parts, fabrications and hardware.
Special-coated and plated fasteners, nuts, bolts and industrial hardware.
Industrial valves, pipe fittings and flanges for process and utilities.
Hydraulic and industrial hoses, adaptors, couplings and fittings.
Rollers, idlers, pulleys, frames and drive components.
Wear parts and spares for industrial and special-purpose machinery.
Moulded polymer parts, rubber components and sealing products.
Pressed, stamped and laser-cut sheet-metal parts and enclosures.
Need a part that isn't listed? Send us a drawing or sample. If it is steel, fabricated or machined, we can usually source it.
Deep experience in the sectors where precision, certification and reliability matter most.
Machined & fabricated parts, brackets, sub-assemblies.
Custom machined and fabricated machine parts.
Axles, hardware, galvanised parts, fabrication.
Implement parts, shafts, gears, wear components.
Stainless fittings, hygienic fabrication, spares.
Wear parts, conveyor components, structural fabrication.
Structural steel, brackets, hardware, fixings.
Valves, fittings, flanges, machined assemblies.
Castings, deck hardware, corrosion-rated components.
Mounting systems, enclosures, precision brackets.
OEM sub-assemblies, machined & fabricated parts.
Rollers, pulleys, frames, drive components.
Moulded polymer parts, rubber & sealing products.
Fasteners, fittings, coated hardware for resellers.
From precision machining to fabrication, casting and beyond, each process is matched to vetted, audited manufacturing partners in India and other cost-competitive countries.
Beyond trading our own range, we help clients build their own low-cost-country supply. It is fully managed from end to end, so you gain the savings without carrying the risk.
We identify, qualify and audit manufacturers in India and other low-cost countries matched to your technical spec, capacity and compliance needs.
We translate your drawings, tolerances and material specs into clear RFQs, run competitive bids and manage sampling & first-article approval.
Factory audits, in-process checks and inspection to an agreed plan, with reports and material certificates. On larger runs such as hardware, we inspect by lot in line with the inspection plan.
Export documentation, customs, consolidation and door-to-door freight by sea or air, landed and delivered to your facility.
Ongoing vendor management, forecasting, inventory buffering and reorder handling for recurring components and BOMs.
Spend analysis, should-cost modelling and low-cost-country sourcing strategy to structurally reduce your total cost of ownership.
You share drawings, quantities and requirements. We scope the opportunity and confirm feasibility.
We shortlist and vet qualified manufacturers, then run a competitive RFQ.
First-article samples and material certs are produced and approved before any bulk run.
We monitor production and carry out in-process checks and inspection to the agreed plan.
Documentation, consolidation, freight and customs handled end-to-end.
Delivered to your facility, with warranty management and reorder support.
Choose transactional, project-based or a fully managed retainer, or blend them to suit.
5 to 15% of order value
Best for one-off or occasional orders. You pay only on successful supply.
Landed price + margin
We buy, inspect, ship and invoice you one landed price. Full control & single point of accountability.
From AUD $2k/month
For ongoing programs and recurring BOMs that need continuous vendor management.
Factory audits, third-party inspection and freight can also be quoted as standalone services. Custom project & success-fee (share-of-savings) arrangements available.
We are not a broad broker or an expensive strategy firm. We are specialists in engineered and fabricated goods who read your drawings, understand your tolerances, and take responsibility for what arrives on your dock.
Three main ways: a commission of 5 to 15% on order value, a fully managed buy-and-sell landed price with margin, or a monthly retainer for ongoing supply-chain management. We will recommend the best fit for your volume.
Mainly India, with access to other cost-competitive manufacturing regions. Today we supply across Australia, and we are building to serve clients in the United States, United Kingdom and European Union.
Every supplier is audited, and orders are inspected in-process and again before dispatch, with documented reports and material certificates. On large quantities we inspect by lot to an agreed inspection plan.
Yes. We manage export documentation, consolidation, freight (sea or air) and customs clearance, delivering door-to-door.
It varies by component and process. Contact us with your drawing and quantity and we'll confirm feasibility and MOQ.
Tell us what you need and we will come back with a feasibility check and indicative pricing.
See what to include for a faster quote and download our capability statement (PDF).